|
|
Properties of asphalt mixtures with RAP
Trnka, Lukáš ; Coufalíková, Iva (referee) ; Dašek, Ondřej (advisor)
The bachelor thesis deals with the properties of asphalt mixtures with reclaimed asphalt. Possibilities of rejuvenate of binder contained in reclaimed asphalt are mentioned in the theoretical part. There is explained the principle of rejuvenators function, types of rejuvenators and ways of rejuvenators dosing into the asphalt mixture. The procedures for performing the stiffness modulus test (2PB-TR) and the low temperature (TSRST) test are described in the following part. Individual tests are evaluated and asphalt mixtures are compared in the practical part of bachelor thesis.
|
|
|
Asphalt mixtures with high resistance against cracks
Stromecký, Roman ; Šperka, Pavel (referee) ; Dašek, Ondřej (advisor)
In this bachelor's thesis were suggested two kinds of asphalt mixtures. The first one contains conventional asphalt binder and the second one Crumb Rubber modified Bitumen. The aim of this thesis is a comparison of stiffness and fatigue characteristics of these two mixtures by two-point bending test on truncated wedges. There will be also an evaluation of the impact of an asphalt addition of the Crumb Rubber modified Bitumen in one of these mixtures.
|
|
|
Open-graded asphalt concrete filled with a special cement grout
Hruška, Lukáš ; Mondschein,, Petr (referee) ; Hýzl, Petr (advisor)
Aim of this thesis is the usage of the open-graded asphalt concrete filled with a special cement grout in the road structures. Thesis defines the main concrete properties and explains related legislation and norms that apply. In addition, laboratory design of asfalt mixtures and a tree kind mortal filler and possibilities of mortal filler pigmentation are dealth with. Finally, thesis evaluates the results from various laboratory tests that were performed on the specimens made from final mixtures.
|
|
|
Usage of foam bitumens in asphalt mixtures
Venclíková, Michaela ; Komenda, Radek (referee) ; Hýzl, Petr (advisor)
In this diploma thesis there are described the issues use of foamed bitumen as binder in asphalt mixtures. The thesis is divided into two parts, theoretical and practical. The aim of theoretical part was to elaborate an overview of technologies, which allow to reduce the temperature during the production and laying of asphalt mixtures. The aim of the practical part was to compare the selected empirical and functional parameters of two types of asphalt mixtures produced in two variants, with hot bitumen and foamed bitumen. Attention was paid mainly to stiffness and low temperature parameters.
|
|
| |
|
|
Usage of thin wearing courses with highly polymer modified bitumen
Renza, Jaroslav ; Rous, Vojtěch (referee) ; Dašek, Ondřej (advisor)
The diploma thesis deals with technology for the implementation and use of asphalt concrete for very thin layers (BBTM) with use of asphalt binder of high-polymer modification (HiMA). Further, there are described selected and performed functional tests. Thesis also contains design of a mixture for bituminous concrete type targeted for very thin layers with different types of binders. After a suitable design of the mixture, laboratory tests were carried out (stiffness modulus, resistance to permanent deformation, low temperature characteristics, water resistance and particle loss). The output of this work is a set of measured values and processed results with their interpretation.
|
|
| |
|
|
Use of polymers in road constructions
Klusková, Jana ; Komenda, Radek (referee) ; Stehlík, Dušan (advisor)
The diploma thesis deals with the use of recycled polymers in asphalt mixtures. In the theoretical part of the thesis there is discussed the global issue of plastic waste including the experience of foreign countries, where this technology has already been introducted and used. The practical part is devoted to the proposal of using recycled plastic in asphalt mixture, description of used laboratory tests and the evaluating the effect of low-density polyethylen (LDPE) on the asphalt mixture type AC. There were performed tensile strenght tests, water resistant tests and stiffness modulus tests in the laboratory (E). The output of this work is an evaluation of measured values, processing of results and their interpretation depending on the possible use of this technology in Czech republic.
|
|
|
Influence of the sample preparation on the stiffness of asphalt mixtures
Pěch, Pavel ; Hýzl,, Petr (referee) ; Varaus, Michal (advisor)
The Bachelor thesis deals with influence of the preparation of probationary bodies to determine of modulus of stiffness. Bodies in the form trapezoid are prepared in two different ways - with trimming and without trimming of all surfaces of the upper and lower party. This way prepared bodies are tested and is determined two-point test for modulus of stiffness. The results of tests are mutually compared.
|
|
|
Use of special binders for recycling of asphalt mixtures at mixing plants
Pěch, Pavel ; Špaček, Petr (referee) ; Varaus, Michal (advisor)
The thesis deals with the matter of usage of special asphalt binders for production of asphalt mixtures containing recycled materials in asphalt plant. For comparison analysis of characteristics of special binder used in roads is necessary to compose different mixtures of asphalt – one with binder containing R-materials, and another benchmark mixture with binder used in common mixtures without recycled materials. Investigation of features of mixtures with different binders is carried out by selected performance tests of asphalt mixtures. Evaluation and comparison of the results is described in the final section of the thesis.
|
guest ::
